Dear students,
In this moment, I’d like you to report the first progress report of TUBES regarding the components purchasing and problem facing during implementation. You may make your own logbook style but usually include information as follows:
- Your logbook should contain sufficient background information to make clear the “physics” being addressed in the experiment.
- Your logbook should contain sufficient information to show how the planned experiment will work to answer the objectives.
- The logbook should contain detailed information on the tests performed.
- The data are recorded directly into the logbook, and preliminary analysis should be done in the logbook ASAP (as soon as possible), to make sure the experiment is working according to the design.
- When you are satisfied that sufficient, good quality data have been acquired, the detailed analysis can be done, including a rigorous analysis of the errors.
For further information on LOGBOOK, you may find it on http://www.cysf.org/forms/logbooks.pdf.
Standard report organization of experiment, generally it comprises some aspects of:
- Introduction
- Apparatus and Techniques:
- Descriptions of all apparatus and instrumentation, and how used, along with…
- Labeled, dimensioned diagrams or photos of key apparatus and instrumentation, and…
- Uncertainty estimates for all primary measurements.
- Results and Discussion:
- Presentation of results in figures, tables
- Description of axes, scales, units, analysis procedures
- Presentation of uncertainties in results (details of uncertainty calculations required but it is usually best to put these in as an appendix)
- Description of what’s in the plots, tables, uncertainty estimates (how the results vary)
- Description of what it means
- Conclusions you can draw from the results
- Conclusions,
- Short summary of what was done.
- Numbered statements summarizing what was learned
- Should not present any new material. E.g. numbered conclusions are most often near repetition of statements elsewhere in report.
- and also
- References
- Appendix(es)
- Figures
For first report progress, please record components purchase, component’s specification, and so on and of course some other works that you have done, on your logbook. Upload the logbook on your blog instead of your presence today, Tuesday 24 November 2015.
8 responses to “Optical Instrumentation: TUBES progress report 1”
wildaherman.student.telkomuniversity.ac.id/
Grup : Rizkha Fadhillah (1105120026)
Wilda Herman (1105120047)
Andriana Febiyanti (1105120137)
http://andrianafebiyanti.student.telkomuniversity.ac.id/
http://rizkafadhilla.student.telkomuniversity.ac.id/
nnubli.student.telkomuniversity.ac.id
Faisal Pakpahan 1105120002
Ni Luh Putu Andrea MS 1105121153
Nur Nubli M 1105121158
http://fahripinem.student.telkomuniversity.ac.id/2015/11/24/log-book-tugas-besar-instrumentasi-optik/
SISTEM PARKIR MENGGUNAKAN SENSOR
OPTIK PHOTODIODA
Achmad Farizal (1105120079)
Asry fahriza Hani Pinem (1105120098)
Harry Wijaya Fauzi (1105120125)
http://dzulfaqar.student.telkomuniversity.ac.id/2015/12/01/logbook/
Tommy Aditya Putra 1105120020
Hilmy Dzul Faqar 1105120127
Azizar Rakhman 1105124160
http://asrianpane.student.telkomuniversity.ac.id/2015/12/02/optical-instrumentation-logbook/
ASRIAN PANE 1105120146
FADLILLAH MUHARRAM SAEFUL 1105120096
M.HIDAYAH SIDIQ 1105120080
http://theochandra.student.telkomuniversity.ac.id/
Theo Chandra Kusuma 1105120011
Indra Laksana 1105120130
Zulfadhly Azim 1105120066